| Product | Dimensions | Material | Hardness (Shore A) | Certification | Stock | ||
|---|---|---|---|---|---|---|---|
| O-ring Black | 628 mm x 6 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee |   | |
| O-ring Black | 86 mm x 4.5 mm | EPDM-EP-EDT-EPR | 75 Shore A | Ja | | |
| O-ring Black | 7.66 mm x 1.78 mm | EPDM-EP-EDT-EPR | 75 Shore A | Ja | | |
|
| O-ring Black | 61 mm x 1.6 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee | | |
| O-ring Black | 95 mm x 5.5 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee | | |
| O-ring Black | 6.75 mm x 1.78 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee | | |
| O-ring Black | 951 mm x 8 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee | | |
| O-ring Black | 831 mm x 10 mm | EPDM-EP-EDT-EPR | 75 Shore A | Ja | | |
| O-ring Black | 68 mm x 10 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee | | |
| O-ring Black | 801 mm x 7 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee | | |
|
| O-ring Black | 73 mm x 1.5 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee | | |
| O-ring Black | 71 mm x 3 mm | EPDM-EP-EDT-EPR | 75 Shore A | Ja | | |
| O-ring Black | 8.5 mm x 2 mm | EPDM-EP-EDT-EPR | 75 Shore A | Ja | | |
|
| O-ring Black | 83 mm x 5 mm | EPDM-EP-EDT-EPR | 75 Shore A | Ja | | |
| O-ring Black | 94 mm x 1.5 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee | | |
|
| O-ring Black | 76.3 mm x 5.7 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee | | |
| O-ring Black | 630 mm x 5 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee | | |
|
| O-ring Lila | 98 mm x 4 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee | | |
| O-ring Black | 630 mm x 8 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee | | |
| O-ring Black | 85 mm x 3 mm | EPDM-EP-EDT-EPR | 75 Shore A | Ja | | |
| O-ring Black | 37.70 mm x 3.53 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee | | |
| O-ring Black | 651 mm x 5 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee | | |
| O-ring Black | 70 mm x 4 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee | | |
| O-ring Black | 6 mm x 0.8 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee | | |
|
| O-ring Black | 69 mm x 4.5 mm | EPDM-EP-EDT-EPR | 75 Shore A | Nee | | |
EPDM is the abbreviation of Ethylene, Propylene, Diene and Monomer and is a group of synthetic rubbers of elastomers. It’s made through the polymerization of tene, propene and a diene, this is an unsaturated hydrocarbon with two double bonds.
This makes EPDM a terpolymer, this is a polymer obtained from three monomers.
EPDM rubber has been used since around 1963 and finds many applications in, for example, construction (roof sealing), the automotive sector (sealing rings, sealing strips on windows and doors), belts, conveyor belts and hoses (for example garden hoses), electrical insulation, pond liner and so on. EPDM is marketed under multiple brand names. EPDM roof coverings can be installed fire-proof in accordance with NEN6050. In the Netherlands, roofing systems must comply with the BroofT1 qualification, which means that an EPDM roofing film must be applied that is fly-proof. EPDM pond liner does not meet this requirement.
The ratio between the amounts of the different monomers used largely determines the properties of the EPDM polymer. The ethylene content can vary from around 45 to 80%. Lower ethylene levels yield a rather amorphous polymer; higher ethylene levels a more crystalline polymer. The diene content can range from approximately 1 to 10/12%. With a higher diene content, a higher degree of vulcanization can be obtained, i.e. a "firmer" rubber.
What is EPDM used for?
The advantages of EPDM:
The downside of EPDM:
On this page we offer our range of 75 Shore A O-Rings. Search for your specific O ring by using the filters on the left of the page or take your time and browse our wide range of our products. When you can not find the product you are looking for in our 75 Shore A made from EPDM, please send us a Direct Enquiry. Together we can discuss the specifications and find the right product for you.
