FFKM O-rings 80 Shore A

Product		Dimensions	Material	Hardness (Shore A)	Certification	Stock
	O-ring White	363 mm  x 3.5 mm	FFKM - FFPM	80 Shore A
	O-ring White	355 mm  x 6 mm	FFKM - FFPM	80 Shore A
	O-ring White	190 mm  x 3.55 mm	FFKM - FFPM	80 Shore A
	O-ring White	16.2 mm  x 2.5 mm	FFKM - FFPM	80 Shore A
	O-ring White	195 mm  x 3 mm	FFKM - FFPM	80 Shore A
	O-ring White	19 mm  x 1.25 mm	FFKM - FFPM	80 Shore A
	O-ring White	344 mm  x 2.5 mm	FFKM - FFPM	80 Shore A
	O-ring White	188 mm  x 1.1 mm	FFKM - FFPM	80 Shore A
	O-ring White	371 mm  x 14 mm	FFKM - FFPM	80 Shore A
	O-ring White	1499.6 mm  x 8.4 mm	FFKM - FFPM	80 Shore A
	O-ring White	349 mm  x 6 mm	FFKM - FFPM	80 Shore A
	O-ring White	12.9 mm  x 1.6 mm	FFKM - FFPM	80 Shore A
	O-ring White	249 mm  x 8.4 mm	FFKM - FFPM	80 Shore A
	O-ring White	15.5 mm  x 3.25 mm	FFKM - FFPM	80 Shore A
	O-ring White	377.8 mm  x 5.7 mm	FFKM - FFPM	80 Shore A
	O-ring White	18.5 mm  x 0.5 mm	FFKM - FFPM	80 Shore A
	O-ring White	189.2 mm  x 8.4 mm	FFKM - FFPM	80 Shore A
	O-ring White	393 mm  x 8 mm	FFKM - FFPM	80 Shore A
	O-ring White	389 mm  x 3.5 mm	FFKM - FFPM	80 Shore A
	O-ring White	874 mm  x 7 mm	FFKM - FFPM	80 Shore A
	O-ring White	355 mm  x 7.5 mm	FFKM - FFPM	80 Shore A
	O-ring White	187 mm  x 6 mm	FFKM - FFPM	80 Shore A
	O-ring White	367 mm  x 6 mm	FFKM - FFPM	80 Shore A
	O-ring White	377 mm  x 3 mm	FFKM - FFPM	80 Shore A

To provide even greater thermal stability and solvent resistance, tetrafluoroethylene (TFE) containing fluoroelastomer terpolymers were introduced in 1959. The latest FKM polymers have a much broader fluids resistance profile than standard fluoroelastomers, and are able to withstand strong bases and ketones as well as aromatic hydrocarbons, oils, acids, and steam. In 1975 a new fluoroelastomer family was introduced by Asahi Glass Co., FEPM, based on an alternating copolymer of TFE and propylene. It is marketed under the trade name AFLAS®.

The chemical resistance and high-temperature stability is due to the bulkiness of the fluorine atoms, shielding the polymer backbone and carbon-fluor bond from attack, and the high bonding energy of the carbon-fluor bond.

FFKM gives the indication for the types of improved properties for different applications.

Material: Fluorocarbon elastomers
Fluorocarbon rubber is an elastomer

Fluorocarbon elastomers are highly fluorinated carbon-based polymers that are used in applications that must withstand aggressive chemical and ozone attacks.

In general, with increasing fluorine content, the resistance to chemical attack is improved, while the low temperature properties decrease. However, there are special quality fluorocarbons that do have a high fluorine content at low temperature properties.

Good qualities:

• Chemical compatibility
• Good temperature resistance
• Low compression setting
• Resistant to minerals, oils and fats
• Good gas tightness
• Excellent resistance to non-polar media
• Excellent weather and aging stability
• Very good oxygen and ozone stability
• Operating temperature range from -26 °C to +205/230 °C (-15 °F to +400/440 °F)
• When used briefly, the material can tolerate even higher temperatures
• Special compounds with improved chemical resistance are available
• Brake fluids based on glycol
• Low molecular weight organic acids

FFKM
FFKM are perfluoroelastomeric compounds that contain an even greater amount of fluorine than FKMO fluoroelastomers.

FFKM have an improved resistance to high temperatures and chemicals and are even resistant to environments where oxygen plasma is present for many hours. Certain grades have a maximum continuous service temperature of 327 °C / 621 °F. They are often used to make o-rings and gaskets that are used to make o-rings and gaskets that are used in applications where contact with hydrocarbons or highly corrosive liquids the case, or when a wide temperature range is encountered.

On this page we offer our range of 80 Shore A O-Rings. Search for your specific O ring by using the filters on the left of the page or take your time and browse our wide range of our products. When you can not find the product you are looking for in our 80 Shore A made from FFKM, please send us a Direct Enquiry. Together we can discuss the specifications and find the right product for you.

To provide even greater thermal stability and solvent resistance, tetrafluoroethylene (TFE) containing fluoroelastomer terpolymers were introduced in 1959. The latest FKM polymers have a much broader fluids resistance profile than standard fluoroelastomers, and are able to withstand strong bases and ketones as well as aromatic hydrocarbons, oils, acids, and steam. In 1975 a new fluoroelastomer family was introduced by Asahi Glass Co., FEPM, based on an alternating copolymer of TFE and propylene. It is marketed under the trade name AFLAS®.

The chemical resistance and high-temperature stability is due to the bulkiness of the fluorine atoms, shielding the polymer backbone and carbon-fluor bond from attack, and the high bonding energy of the carbon-fluor bond.

FFKM gives the indication for the types of improved properties for different applications.

Material: Fluorocarbon elastomers
Fluorocarbon rubber is an elastomer

Fluorocarbon elastomers are highly fluorinated carbon-based polymers that are used in applications that must withstand aggressive chemical and ozone attacks.

In general, with increasing fluorine content, the resistance to chemical attack is improved, while the low temperature properties decrease. However, there are special quality fluorocarbons that do have a high fluorine content at low temperature properties.

Good qualities:

• Chemical compatibility
• Good temperature resistance
• Low compression setting
• Resistant to minerals, oils and fats
• Good gas tightness
• Excellent resistance to non-polar media
• Excellent weather and aging stability
• Very good oxygen and ozone stability
• Operating temperature range from -26 °C to +205/230 °C (-15 °F to +400/440 °F)
• When used briefly, the material can tolerate even higher temperatures
• Special compounds with improved chemical resistance are available
• Brake fluids based on glycol
• Low molecular weight organic acids

FFKM
FFKM are perfluoroelastomeric compounds that contain an even greater amount of fluorine than FKMO fluoroelastomers.

FFKM have an improved resistance to high temperatures and chemicals and are even resistant to environments where oxygen plasma is present for many hours. Certain grades have a maximum continuous service temperature of 327 °C / 621 °F. They are often used to make o-rings and gaskets that are used to make o-rings and gaskets that are used in applications where contact with hydrocarbons or highly corrosive liquids the case, or when a wide temperature range is encountered.

On this page we offer our range of 80 Shore A O-Rings. Search for your specific O ring by using the filters on the left of the page or take your time and browse our wide range of our products. When you can not find the product you are looking for in our 80 Shore A made from FFKM, please send us a Direct Enquiry. Together we can discuss the specifications and find the right product for you.