Piston seal – radial deformation .O-ring assembly in inside element.
Rod seal – radial deformation
O-ring assembly in outside element
Flange seal – axial deformation
Pressure from inside: O-ring outside diameter must be compressed.
Pressure from outside: O-ring inside diameter must be stretched.
For applications our recommendations refer to the diameter range and are dependent upon the section as given in the DIN 3771 Part 1.The dynamic application of O-rings over 250 mm diameter is not recommended.
O-ring assembled in a gland
Piston seal – radial deformation
O-ring assembled in a male groove
O-ring assembled in a male gland
O-ring assembled in a gland